工具選定 | オーエスジー

Showing 1-10 of 17 results

answer
Please check the following as a countermeasure in the event of galling or gnawing of the internal thread during tapping.
- Check if the tap is right on the workpiece material.
・ Check whether the part with the bite is worn
・Increase the lubricity of the cut oil (if i
No : 8218
Published : Modified : 2024/08/28 02:29
Category: Tool selection
answer
<span translate="no"> Tap </span>processing of two types of titanium (TB340)

Tap processing of titanium 2 types (TB340)

Two types of titanium (TB340) are pure titanium without heat treatment, and we recommend the Tap "EX-SUS-SFT" for stainless steel.

"V-TI-S

No : 520
Published : 2024/10/22 00:00 Modified : 2024/11/01 02:38
Category: Tool selection
answer
<span translate="no"> Tap </span>processing for Hastelloy C22 and C276

Tap processing for Hastelloy C22 and C276

For Tap processing of Hastelloy C22 and C276, A-SFT and EX-SUS-SFT are recommended if they have been settled. As a guideline for cutting condi

No : 525
Published : 2024/10/22 00:00 Modified : 2024/11/01 02:38
Category: Tool selection
answer
<span translate="no"> external center </span>removed<span translate="no"> spiral fluted tap </span>}}

external center removed spiral fluted tap }}

The A-SFT is an easy-to-use Tap with external center

No : 607
Published : 2024/10/22 00:00 Modified : 2024/11/01 02:38
Category: Tool selection
answer
Is it possible to support deep hole drilling with A-SFT?

Is it possible to support deep hole drilling with A-SFT?

The A-SFT supports effective thread depths up to 2.5D (2.5 times the outer diameter of the thread).

It is not recommended for deep hole processing exceeding 2.5D.

If the workpiece material is car

No : 629
Published : 2024/10/22 00:00 Modified : 2024/11/01 02:38
Category: Tool selection
answer
Is there an insert screw in the A-SFT?

Is there an insert screw in the A-SFT? 

There is a product called A-SFT-HL. This is a Tap that processes a screw with a larger outer diameter (same pitch) than the displayed size so that it becomes the thread size specified in the drawing after i

No : 630
Published : 2024/10/22 00:00 Modified : 2024/11/01 02:38
Category: Tool selection
answer

What is EXZ-SFT?

Based on the basic performance of the general-purpose spiral Tap (EX-SFT), this is a "general-purpose high-durability spiral Tap " with improved chipping resistance and wear resistance through special surface treatment.

<
No : 8688
Published : 2024/10/22 00:00 Modified : 2024/11/04 14:49
Category: Tool selection
answer
Step (1)
Check whether the screw you want to process is " through hole " or "blind hole", and open the relevant page of the general catalog "Tap Selection Criteria Table"
through hole : Screw is pierced
Blind hole: screw not penetrated

No : 12317
Published : 2022/06/02 09:32 Modified : 2024/08/28 02:29
Category: Tool selection
answer
The short thread type (tap product name: S-TPT) is used for screwing elbows, teas, and other items with a short thread length.
 
Since the reference diameter position is shorter than that of the long thread type, it is possible to secure the reference diameter with a short thread length. It is used when the pilot hole depth is not as long as the lo
No : 8160
Published : 2020/10/21 15:11 Modified : 2024/08/28 02:29
Category: Tool selection
answer
Only those with size in inches are in the standard lineup.

General use (HT, SFT, POT)
General Use Long Shank (HT, SFT, POT)
For SUS (SFT, POT)
NT (Nut Tap)
 
The size and pitch notation W20-12 (Detail No. 1) and W20-16 (Detail No. 2) are not in the standard pro
No : 8144
Published : 2020/10/20 16:39 Modified : 2024/08/28 02:29
Category: Tool selection

Searching in progress