external center removed spiral fluted tap }}
The A-SFT is an easy-to-use Tap with external center
タップ | オーエスジー
88 件中 11-20 件を表示
No : 607
公開日時 : 2024/10/22 00:00
更新日時 : 2024/11/01 02:38
カテゴリー：
Tool selection
A Tap _ Use on machines with synchronous feed mechanism
A Tap can be used on machines with a synchronization function.
When the cutting speed ex
No : 622
公開日時 : 2024/10/22 00:00
更新日時 : 2024/11/01 02:38
Is it possible to support deep hole drilling with A-SFT?
The A-SFT supports effective thread depths up to 2.5D (2.5 times the outer diameter of the thread).
It is not recommended for deep hole processing exceeding 2.5D.
If the workpiece material is carbon steel and the thread length exceeds 2.5D in diameter, use MS-DH-SFT.
No : 629
公開日時 : 2024/10/22 00:00
更新日時 : 2024/12/25 06:24
カテゴリー：
Tool selection
Is there an insert screw in the A-SFT?
There is a product called A-SFT-HL. This is a Tap that processes a screw with a larger outer diameter (same pitch) than the displayed size so that it becomes the thread size specified in the drawing after i
No : 630
公開日時 : 2024/10/22 00:00
更新日時 : 2024/11/01 02:38
カテゴリー：
Tool selection
Is it possible to process Inconel and Hastelloy with A-TPT for tapered threads for pipes?
Basically, we do not recommend it.
For tapered threading for Inconel and Hastelloy pipes, we recommend CPM-TPT for difficult-to-cut mate
No : 651
公開日時 : 2024/10/22 00:00
更新日時 : 2024/11/01 02:38
Tap Relationship between machining efficiency and cutting data
Machining efficiency is expressed in terms of feed rate (Vf, mm/min).
The formula for calculat
No : 8491
公開日時 : 2024/10/22 00:00
更新日時 : 2024/11/01 02:38
What is EXZ-SFT?
Based on the basic performance of the general-purpose spiral Tap (EX-SFT), this is a "general-purpose high-durability spiral Tap " with improved chipping resistance and wear resistance through special surface treatment.
No : 8688
公開日時 : 2024/10/22 00:00
更新日時 : 2024/12/25 06:25
カテゴリー：
Tool selection
What should be done when vertical streaks (stop marks) are formed in tapered threads for pipes?
When machining with Tap , vertical streaks (stop marks) are always attached because the reverse rotation is returned after machining with forward rotation.
As a countermeasure, it is recommended to process with a threa
No : 8922
公開日時 : 2024/10/22 00:00
更新日時 : 2024/11/04 14:49
Can the pipe taper Tap TPT be processed in steps?
Stepping with a Tap is not recommended because unlike drilling, chips will bite into the Tap thread.
No : 8923
公開日時 : 2024/10/22 00:00
更新日時 : 2024/11/01 02:38
What to do if the machine stops during machining with a pipe taper Tap
Pipe taper Tap machining tends to require 2~3 times the cutting torque compared
No : 8924
公開日時 : 2024/10/22 00:00
更新日時 : 2024/11/01 02:38