Can I grab the AT-1 with the baking holder?
The shank accuracy of the AT-1 is h6 in the JIS fit tolerance, so the bake-fit holder can be used.
(FAQID:4435)
Aスレッドミル | オーエスジー
Showing 1-8 of 8 results
(FAQID:4435)
No : 4435
Published : 2024/10/22 00:00
Modified : 2024/11/01 02:38
Category：
A-thread mill
We want to shorten the processing time of the AT-1 compared to the current situation.
When creating a program in ThreadPro, the default cutting data field of AT-1 is set to the lower limit.
Try increasing the cutting conditions while paying attention to v
No : 4438
Published : 2024/10/22 00:00
Modified : 2024/11/01 02:39
Category：
A-thread mill
Is it okay to use the same program when using a new AT-1 from the conventional product that has been used so far?
Since the shape of the tool has changed, the program cannot be shared.
Please use our program creation support app "ThreadPro" to create a new
No : 4441
Published : 2024/10/22 00:00
Modified : 2024/11/01 02:38
Category：
A-thread mill
What is the thread mill AT-2 with end cutting edge for high-hardness steel?
It is a thread mill with end cutting edge for high-hardness steel.
Helical drilling and threading can be performed simultaneously in a single
No : 7843
Published : 2024/10/22 00:00
Modified : 2024/11/01 02:39
Category：
A-thread mill
AT-2 regrinding Yes
AT-2 regrinding is not possible.
(FAQID:7844)
No : 7844
Published : 2024/10/22 00:00
Modified : 2024/11/01 02:38
Category：
A-thread mill
Unlike other thread mills, the AT-2 has a left-hand blade, but why? Does the left-hand blade differ from other tools?
The AT-2, a thread mill with end cutting edge for high-hardness steel, is a left-hand blade specification (= used with left-hand rotation of the
No : 7848
Published : 2024/10/22 00:00
Modified : 2024/11/01 02:39
Category：
A-thread mill
Can the high-efficiency thread mill AT-2 R-SPEC with non-ferrous end cutting edge be used without cutting oil?
Basically, water-soluble cutting oil is recommended.
If there is a pilot hole, it can also be machined in air blow
No : 9093
Published : 2024/10/22 00:00
Modified : 2024/11/01 02:38
Category：
A-thread mill
Precautions for the use of the high-efficiency thread mill AT-2 R-SPEC with end cutting edge for non-ferrous applications
Since it is a left-hand blade specification, please use it with reverse spindle rotation & climb cut .
<No : 9095
Published : 2024/10/22 00:00
Modified : 2024/11/01 02:39
Category：
A-thread mill