How many millimeters to double margin is ADFO-3D?
φ3 mm or more is a double margin.
(FAQID:4451)
Aドリル | オーエスジー
Mostrando 31-40 de 40 resultados
(FAQID:4451)
No : 4451
Publicado : 2024/10/22 00:00
Modificado : 2024/11/01 02:38
Categoría：
A drill
Half-cracking is possible. However, it is necessary to adjust the cutting data.
Reference: Processing half-hole(FAQID:4452)
No : 4452
Publicado : 2024/10/22 00:00
Modificado : 2025/04/17 07:25
Categoría：
A drill
What is the pin angle for ADF-2D ADFO-3D?
It will be the pin angle.
It is a specification that allows you to aim for a right-angle shape at the bottom of the hole.
No : 4455
Publicado : 2024/10/22 00:00
Modificado : 2024/11/01 02:38
Categoría：
A drill
When using the ADFLS-2D, it is necessary to center the diameter to be larger than the drill diameter to prevent the tool from running wild during chamfer due to a long overhang.
If the drill diameter is φ3 or less, it is about +0.5 mm.
If the drill diameter exceeds φ3, it is about +1 mm.
Note that point angle can be 90° or 120°. <
No : 4458
Publicado : 2024/10/22 00:00
Modificado : 2025/04/17 07:25
Categoría：
A drill
Measures against internal burrs in the side hole processing of pipes
The ADF-2D and ADFO-3D series are effective for internal burrs in the side hole processing of pipes.
The cuttin
No : 4471
Publicado : 2024/10/22 00:00
Modificado : 2024/11/01 02:38
Categoría：
A drill
I want to make the tip flat with a hole depth of 5D.
After machining a 5D hole with a normal drill with a tip angle, only the tip angle is machined with ADFLS-2D (a type with a long neck). (The step amount is 0.2D
No : 4472
Publicado : 2024/10/22 00:00
Modificado : 2024/11/01 02:38
Categoría：
A drill
Optimal specifications according to the processing depth! Drill ADO Series with Carbide Oil Hole
Aren't the specifications of the drills the same, just the length is different? What is a good drill for machining depth
No : 5387
Publicado : 2024/10/22 00:00
Modificado : 2024/11/01 02:38
Categoría：
A drill
Carbide Flat Drill What is ADF?
Drills that can be used on inclined and curved surfaces with high efficiency
Carbide flat drills ADF / ADFO series.
The ADF series is a general-purpose carbide drill with a flat tip.
It can be used for a wide range of material
No : 5424
Publicado : 2024/10/22 00:00
Modificado : 2024/11/04 14:49
Categoría：
A drill
What is ADFO-3D, a flat drill with carbide oil holes?
Compatible with stainless steel, the flat drill that can process up to 3 times the diameter of the tool is
Carbide flat drills ADFO series.
The ADFO series is a drill with a carbide oil hole with a flat tip.
It is an inte
No : 5427
Publicado : 2024/10/22 00:00
Modificado : 2024/12/25 06:24
Categoría：
A drill
The new normal of three-blade drills! What is ADO-TRS?
I want to improve my drilling process.
I hear that a three-blade drill is more difficult to use than a two-blade drill, but if you are looking for a good drill.
No : 5429
Publicado : 2024/10/22 00:00
Modificado : 2024/11/01 02:38
Categoría：
A drill