44 件中 11-20 件を表示
Is step machining performed with an ADO-SUS drill appropriate?
It is better not to step because it will be adversely affected by work hardening. In situations where it is necessary to improve the discharge of chips, we recommend douel processing (G04).
The oil hole shape of the ADO-SUS drill exceeds φ6 and is quite different from the general oil hole shape, but what is the difference?
It is a new type of oil hole called MEGA COOLE
ADO-SUS drill blade chipping
After centering the 90-degree tip angle, which also serves as a chamfer, it is machined with an ADO-SUS drill, but the blade frequently chipping . How to improve that blade
The processing of titanium alloy produces bellows-like chips
In the case of titanium alloy processing, bellows-shaped chips are emitted.
ADO-SUS Step Machining
When processing SUS in the ADO-SUS series, it is basically recommended to use a non-step.
This is because step processing increases the opportunity to rub the inside of the hole, resulting in work hardening.
The strain on the blade by the step causes a decrease i
Is centering required before drilling ADO-SUS?
In the ADO, ADO-SUS series, in the case of a flat surface,
Alternatively, centering is not required if the processing depth is less than or equal to 8 times the diameter.
For processing on curved surfaces, et
What are the features of the ADO-SUS series MEGA COOLER?
With a larger oil hole shape, the flow velocity of the cutting oil is about 2 times higher and the flow rate is increased by about 1.3 times.
This allows for fast removal of cutting heat and chip
What is an ADO-SUS drill?
The ADO-SUS series is a drill for stainless steel and titanium alloys with carbide oil holes.
ADFLS-2D does not provide hole position accuracy
If the hole position accuracy is not stable with a long shank type such as the ADFLS-2D, centering larger than the tool diameter is effective in advance.
