What are the types of cutting oil when using AE-LNBD-N and what should they be used properly?
Basically, we recommend "water-soluble cutting oil".
If you value the machining surface and precision, use "insoluble cutting oil".
Aブランド | オーエスジー
显示101-110的 123 结果
No : 8617
发表 : 2024/10/22 00:00
改 性 : 2024/11/01 02:38
类别：
A end mill
Holder selection when using AE-LNBD-N
Use a rigid holder with as little runout as possible.
The shank of the AE-LNNBD-N adopts a high-precision h4 tolerance (0/-0.004).
You can also use a bake-fitting holder.
(FAQID:8618)
No : 8618
发表 : 2024/10/22 00:00
改 性 : 2024/11/01 02:38
类别：
A end mill
Can the high-efficiency thread mill AT-2 R-SPEC with non-ferrous end cutting edge be used without cutting oil?
Basically, water-soluble cutting oil is recommended.
If there is a pilot hole, it can also be machined in air blow
No : 9093
发表 : 2024/10/22 00:00
改 性 : 2024/11/01 02:38
类别：
A-thread mill
Precautions for the use of the high-efficiency thread mill AT-2 R-SPEC with end cutting edge for non-ferrous applications
Since it is a left-hand blade specification, please use it with reverse spindle rotation & climb cut .
<No : 9095
发表 : 2024/10/22 00:00
改 性 : 2024/11/01 02:39
类别：
A-thread mill
What is AE-VMFE?
This is a long shank type end mill with a thick blade (a shape with a tool outer diameter larger than the shank diameter) that is suitable for deep standing walls and pocket machining with L/D = 5 or more.
By changing the protruding length, various processing depths
No : 9335
发表 : 2024/10/22 00:00
改 性 : 2024/11/01 02:38
类别：
A end mill
Can AE-VMFE regrinding ?
regrinding is possible.
In order to ensure performance, recoating is also recommended.
regrinding ・If you wish to recoat, please contact our sales of
No : 9337
发表 : 2024/10/22 00:00
改 性 : 2024/11/01 02:38
类别：
A end mill
Coverage of AE-VMFE Standing Wall Depth
The AE-VMFE can be used on standing walls up to a depth of 8D (8 times the diameter of the tool).
・ Click here for the AE-VM series catalog
No : 9339
发表 : 2024/10/22 00:00
改 性 : 2024/11/01 02:38
类别：
A end mill
What is AE-ML-H?
I want to make the 60HRC mold processing more efficient.
It is an end mill that is ideal for reducing cycle time for side processing with high hardness steel.
What is AE-ML-H?
・Carbide end mill for high-ha
No : 9623
发表 : 2024/10/22 00:00
改 性 : 2024/11/01 02:38
类别：
A end mill
What is AE-VTFE-N?
This is a long shank type end mill with a thick blade (= a shape with a tool outer diameter larger than the shank diameter) that is suitable for deep standing walls and pocket machining of L/D = 5 or more in non-ferrous metals.
No : 9689
发表 : 2024/10/22 00:00
改 性 : 2024/11/01 02:38
类别：
A end mill
I would like to know whether or not AE-VTFE-N can be redeveloped.
regrinding Yes.
In order to ensure performance, recoating is also recommended.
regrinding
No : 9690
发表 : 2024/10/22 00:00
改 性 : 2024/11/01 02:38
类别：
A end mill