What is AE-MSS-H?
・Carbide end mill for high-hardness steel multiple flutes Square type stub type (= shorter than short type flute length = 1.5D).
Aブランド | オーエスジー
Εμφάνιση 91-100 115 αποτελεσμάτων
No : 8606
Δημοσιευμένος : 2024/10/22 00:00
Τροποποιηθεί : 2024/11/04 14:49
κατηγορία：
A end mill
Can AE-MSS-H regrinding ?
regrinding is possible.
In order to ensure performance, recoating is also recommended.
No : 8607
Δημοσιευμένος : 2024/10/22 00:00
Τροποποιηθεί : 2024/11/01 02:38
κατηγορία：
A end mill
What is AE-LNBD-N?
DLC carbide end mill for copper electrode This is a 2-blade long neck ball type for high-precision finishing.
・It is effective in suppressing burrs, ensuring accurate edge shapes, and achieving high-quality processed surfaces.
【Main features】
・Ball blade
No : 8613
Δημοσιευμένος : 2024/10/22 00:00
Τροποποιηθεί : 2025/04/17 07:31
κατηγορία：
A end mill
Can AE-LNNBD-N regrinding ?
regrinding Yes (R2 and above).
Recoating is also recommended to ensure performance.
regrinding
No : 8616
Δημοσιευμένος : 2024/10/22 00:00
Τροποποιηθεί : 2024/11/01 02:38
κατηγορία：
A end mill
What are the types of cutting oil when using AE-LNBD-N and what should they be used properly?
Basically, we recommend "water-soluble cutting oil".
If you value the machining surface and precision, use "insoluble cutting oil".
No : 8617
Δημοσιευμένος : 2024/10/22 00:00
Τροποποιηθεί : 2024/11/01 02:38
κατηγορία：
A end mill
Holder selection when using AE-LNBD-N
Use a rigid holder with as little runout as possible.
The shank of the AE-LNNBD-N adopts a high-precision h4 tolerance (0/-0.004).
You can also use a bake-fitting holder.
(FAQID:8618)
No : 8618
Δημοσιευμένος : 2024/10/22 00:00
Τροποποιηθεί : 2024/11/01 02:38
κατηγορία：
A end mill
Can the high-efficiency thread mill AT-2 R-SPEC with non-ferrous end cutting edge be used without cutting oil?
Basically, water-soluble cutting oil is recommended.
If there is a pilot hole, it can also be machined in air blow
No : 9093
Δημοσιευμένος : 2024/10/22 00:00
Τροποποιηθεί : 2024/11/01 02:38
κατηγορία：
A-thread mill
Since it is a left-hand blade specification, please use it with reverse spindle rotation & climb cut .
Please confirm in advance that the bottom of the finished hole with end cutting edge is permissible in the machining instructions because it has a different shape from a normal drill.
The
No : 9095
Δημοσιευμένος : 2024/10/22 00:00
Τροποποιηθεί : 2025/04/17 07:25
κατηγορία：
A-thread mill
What is AE-VMFE?
This is a long shank type end mill with a thick blade (a shape with a tool outer diameter larger than the shank diameter) that is suitable for deep standing walls and pocket machining with L/D = 5 or more.
By changing the protruding length, various processing depths
No : 9335
Δημοσιευμένος : 2024/10/22 00:00
Τροποποιηθεί : 2024/11/01 02:38
κατηγορία：
A end mill
Can AE-VMFE regrinding ?
regrinding is possible.
In order to ensure performance, recoating is also recommended.
regrinding ・If you wish to recoat, please contact our sales of
No : 9337
Δημοσιευμένος : 2024/10/22 00:00
Τροποποιηθεί : 2024/11/01 02:38
κατηγορία：
A end mill