exchangeable head High-performance DLC end mill for non-ferrous applications PXAL
Is there a large-diameter end mill that can process non-ferrous metals such as aluminum
製品情報_OSG PHOENIX | オーエスジー
23 件中 11-20 件を表示
No : 7838
公開日時 : 2024/10/22 00:00
更新日時 : 2024/11/01 02:38
カテゴリー：
Products_OSG PHOENIX
Precautions for centering in PLDS
One thing to keep in mind when centering PLDS is that the centering diameter should be smaller than the drill diameter.
If the centering diameter is large, the subsequent drill may hit the workpiece from the shoulder and cause a blade chipping .
Referen
No : 7840
公開日時 : 2024/10/22 00:00
更新日時 : 2024/11/04 14:49
カテゴリー：
Products_OSG PHOENIX
6 Corners shoulder milling What is the Cutter Series PSTW?
Compared to common shoulder milling cutters
(1) Large number of corners used (= 6 corners can be used, high economy)
(2) Design with a good balance of rigidity and sharpness (= suppression of vibration in a long protruding environment, ex
No : 8230
公開日時 : 2024/10/22 00:00
更新日時 : 2024/11/04 14:49
カテゴリー：
Products_OSG PHOENIX
What is an Indexable Flat Drill PDZ?
It is an indexable type drill that can finish the bottom of the hole flat.
【Main features】
High chip handling
Fragmentation of chips by muscle insert breaker , promotion of chip discharge by high-precision groove specificati
No : 9124
公開日時 : 2024/10/22 00:00
更新日時 : 2024/11/04 14:49
カテゴリー：
Products_OSG PHOENIX
Precautions for the use of PDZ inserts
Precautions for using PDZ inserts include:
The diamond-shaped insert ZPNT is used, but two different corners are applied to each of the four corners of the cutting blade, one for the peripheral flute and one f
No : 9126
公開日時 : 2024/10/22 00:00
更新日時 : 2024/11/01 02:39
カテゴリー：
Products_OSG PHOENIX
In addition to holes from muku on flat machined surfaces, stable machining while dividing chips is possible by the action of insert breaker even in environments where pilot holes have been machined in advance.
In
No : 9127
公開日時 : 2024/10/22 00:00
更新日時 : 2024/11/01 02:38
カテゴリー：
Products_OSG PHOENIX
What is PSE automatic lathe-compatible? 90° shoulder cutter with 50mm length ER11 and ER16 collet compatible shank
Among the indexable (exchangeable cutting edge) shoulder milling cutter PSE series, this type has specifications that are particularly suitable for machining on automatic lathes, and
No : 12969
公開日時 : 2024/10/22 00:00
更新日時 : 2024/11/01 02:38
カテゴリー：
Products_OSG PHOENIX
What is Ball End Mill PFB for Indexable Type Finishing?
PFB is an indexable type ball end mill for finishing.
The insert has a high ball-radius accuracy of ± 6 μm and a sharp spiral blade shape for a good machined surface and a long service life.
With a wide variety of specification
No : 12973
公開日時 : 2024/10/22 00:00
更新日時 : 2024/11/01 02:38
カテゴリー：
Products_OSG PHOENIX
What is an interchangeable head end mill PXM?
The PXM end mill with swappable head consists of a carbide head section and a dedicated holder for the PXM.
Compared to solid carbide tools, only the head can be replaced, which has a cost advantage when machining large diameters. In addition,
No : 12977
公開日時 : 2024/10/22 00:00
更新日時 : 2024/11/01 02:39
カテゴリー：
Products_OSG PHOENIX
What is PXMC Ultra-Short Collet Extra Short Type Collet? PXM Series
PXMC is a collet that can be directly attached to the head part of the PXM series.
No : 13289
公開日時 : 2024/10/22 00:00
更新日時 : 2024/11/01 02:39
カテゴリー：
Products_OSG PHOENIX