indexable counterboring tool PZAG
PZAG is an indexable counterboring machining tool from the indexable tool brand OSG PHOENIX.
製品情報 OSG PHOENIX | オーエスジー
Showing 1-10 of 33 results
No : 5381
Published :
Modified : 2024/08/28 02:29
Category：
Products OSG PHOENIX
Multifunctional Cutter Series PMD
It is a multifunctional cutter of the Phoenix brand indexable type. With a single machine, continuous processing can be performed from the state of muku to plunge (hole processing) → horizontal milling . In addition to grooving and side processing, it can also be used for helical ramping, plunge proces
No : 7818
Published :
Modified : 2024/08/28 02:29
Category：
Products OSG PHOENIX
Applications of 6 Corner shoulder milling Cutter Series PSTW
PSTW is suitable for machining with long overhangs that are prone to vibration and processing that requires higher efficiency.
In addition, PSE (rectangular single-sided 2 corners) is used for helical ramping processing.
For low-cut machining in small machining centers, P
No : 8232
Published : 2025/03/07 00:00
Modified : 2025/04/17 07:24
Category：
Products OSG PHOENIX
Actually, this is normal.
This misalignment is not abnormal, as it is a clamping fee to make the insert adhere to the holder by tightening the screw.
For indexable tools, it is common to have a structure with such a clamping allowance.
For indexable tools, it is common to have a structure with such a clamping allowance.
No : 8451
Published : 2025/03/07 00:00
Modified : 2025/04/17 07:24
Category：
Products OSG PHOENIX
The OSG PHOENIX series indexable cutter is sold separately with a wrench.
Since PMD uses two types of inserts, two types of wrenches are required.
peripheral flute Insert Mounting Wrench
8IP-D (Torx 8IP) Tool No.78
No : 8570
Published : 2025/03/07 00:00
Modified : 2025/04/17 07:24
Category：
Products OSG PHOENIX
The accuracy of the insert can be checked by the third alphabet of the insert's model number.
< accuracy classification >
No : 9656
Published : 2025/03/07 00:00
Modified : 2025/04/17 07:24
Category：
Products OSG PHOENIX
Wiper inserts have a longer secondary cutting edge than general inserts, and have a structure that protrudes slightly more than other cutting edges during installation.
Therefore, the effect of always smoothing the machined surface can be obtained, and the accuracy of the finished surface can be improved.
Basically, one wiper insert is set in the cu
No : 10259
Published : 2025/03/07 00:00
Modified : 2025/04/17 07:24
Category：
Products OSG PHOENIX
Refers to a shoulder milling cutter with a cutting edge angle of 90°.
It is used when you want to use the edge of the cutting edge to cut the machined part at a right angle.
Insert shapes vary from triangle to square to rectangle, but all of them are arranged so that the peripheral flute are almost vertical.
No : 10263
Published : 2025/03/07 00:00
Modified : 2025/04/17 07:24
Category：
Products OSG PHOENIX
It is a good rule of thumb up to around ~65HRC.
(FAQID:12975)
No : 12975
Published : 2025/03/07 00:00
Modified : 2025/04/17 07:24
Category：
Products OSG PHOENIX
PFB-Q and PFB-Q-ST inserts can be undercut by selection.
All of them have a spherical effective cutting edge range of ~220°, which avoids the risk of interference with the wall during machining.
(FAQID:12976)
No : 12976
Published : 2025/03/07 00:00
Modified : 2025/04/17 07:24
Category：
Products OSG PHOENIX