工具選定 | オーエスジー

Showing 1-10 of 16 results

answer
What are the recommended end mills for stainless steel?

When used in a machining center, it is recommended to use a helix angle that is stronger than the standard 30° twist.

For carbide end mills, we have the AE-VM series, and for high-speed end mills, we have V-XPM-Hi-Helix specifications.

For general-purpose machines and thin plate processing, it is

No : 351
Published : Modified : 2024/08/28 02:29
Category: Tool selection
answer

What are the characteristics of the selection and processing of end mills in titanium materials? < heat-resistant alloy>

Titanium materials have low thermal conductivity and tend to rise in temperature locally. As for the effect on the tool, it is easy to wear and tear. The cutting force of titanium fluctuates greatly, which is easy to cause tool loss. OSG has an e

No : 381
Published : Modified : 2024/08/28 02:29
Category: Tool selection
answer

What is a keyway end mill?

Since there is a "keyway standard" defined by JIS for keyways, it is recommended that you check the width and depth of the keyway before machining before selecting a tool.

OSG has dedicated end mills for keyway processing in high-speed (EKD), coated high-speed (TIN, V) and carbide (MG).

 

Features of Keyway Tool EKD

<
No : 659
Published : Modified : 2024/08/28 02:29
Category: Tool selection
answer
coarse pitch and Fine Pitch < Roughing End Mills>

The pitch of the nick groove (or R groove) is coarse pitch standard, and the fine pitch is fine.

Wavy cutting edge (luffing): Large incision enables efficient roughing

No : 662
Published : Modified : 2024/08/28 02:29
Category: Tool selection
answer

What is an end mill for V-groove machining?

Currently, we do not have any solid tools that we recommend for V-groove machining.

There are tools with a V-shaped tip (V-cut) shape.

However, this tool is not recommended for V-groove machining, but is used for chamfering with horizontal milling .

References:

No : 670
Published : Modified : 2024/08/28 02:29
Category: Tool selection
answer
How to machine right-angle shapes with an end mill? Sharp Corner Edge Gaze

In order to machine a right-angle shape with an end mill, the tool side that processes it must also have a right-angle shape when rotated. The shape of the tool side is called the sharp corner edge.

The corners of the high-end mill are all sharp corner edge specifications except for t

No : 671
Published : Modified : 2024/08/28 02:29
Category: Tool selection
answer

What is Right Angle (RA)? Sharp corner edges? Can you do right-angle machining?

Right angle means right angle. RA(=Right Angle Type)

This specification refers to a special cutting edge treatment for square end mills that can at the same time ensure the right angle of the corner of the machined surface while applying a blade patch (gash application) to improve ch

No : 7849
Published : Modified : 2024/08/28 02:29
Category: Tool selection
answer
Do you have an end mill for bottom finishing?
If you are looking for the roughness of the bottom surface, we recommend the end mill "FX-MCF" for bottom finishing.
This is a dedicated end mill for bottom finishing with Cermet base material +FX coating.
High-speed, mirror finish processing is realized.
 
No : 8411
Published : Modified : 2024/08/28 02:29
Category: Tool selection
answer
Do you have an end mill that end cutting edge flat?

If you are asked if there is an end mill with a flat end cutting edge , the tool to be selected depends on the application.

 
Application (1) counterboring Machining
 
No : 9311
Published : Modified : 2024/08/28 02:29
Category: Tool selection
answer
What is an end mill that can process right-angle corners? Pinkad Right Angle

What is an end mill that can process right-angle corners? Pinkad Right Angle

If there is an indication for a right-angle corner in the drawing, the end mill side must also be at a right angle. However, in the case of a typical carbide end

No : 7872
Published : 2024/10/22 00:00 Modified : 2024/11/01 02:39
Category: Tool selection

Searching in progress