ドリル | オーエスジー

Showing 21-28 of 28 results

answer
How many steps do you need to drill? G83 external coolant supply and internal coolant supply

For external coolant supply

With a vertical processing machine, there is no step up to 3D hole depth. If you exceed 3D, you can use 1D~2D steps as a guide. (D: Drill diameter)

If you

No : 7764
Published : Modified : 2024/08/28 02:29
answer

Drill selection procedure How to choose the right drill

Step (1) Check how many times the depth of the hole to be processed is the diameter
If the drill diameter (D) is 10 mm and the depth is 30 mm
Calculate 30÷10=3 and consider it "3D"
 

Step (2) Find a drill that is compatible with the workpiece material

No : 12227
Published : Modified : 2024/08/28 02:29
Category: Tool selection
answer
When using the FX-ZDS end mill for carbide<span translate="no"> counterboring </span>, do I need to drill pilot holes first?

When using the FX-ZDS end mill for carbide counterboring , do I need to drill pilot holes first? 

When using FX-ZDS, an end mill for carbide

No : 692
Published : 2024/10/22 00:00 Modified : 2024/11/01 02:38
Category: General
answer
Is there a formula for calculating thrust resistance during drilling?

Estimating thrust, torque, and power requirements

When considering the clamping method and clamping fixture of the workpiece, the thrust and torque generated during drilling must be considered. If you want to make an approximate guess, you can find it from a simple empirical formula. Here

No : 707
Published : 2024/10/22 00:00 Modified : 2024/12/25 06:24
Category: Other
answer
Is there a general-purpose drill that is carbide and can be used for external lubrication instead of internal lubrication?

Is there a general-purpose drill that is carbide and can be used for external lubrication instead of internal lubrication? 

A general-purpose drill that is carbide and can be used for ext

No : 789
Published : 2024/10/22 00:00 Modified : 2024/11/01 02:38
Category: Tool selection
answer
<span translate="no"> counterboring </span>Do pilot holes be required for machining?

counterboring Do pilot holes need for machining? 

If the machining environment (workpiece shape, machine, etc.) is rigid enough, consider counterboring machining from

No : 872
Published : 2024/10/22 00:00 Modified : 2024/11/01 02:38
Category: General
answer

What is the difference between a three-blade drill and a two-blade drill?

First of all, what do you want to improve from the two-blade drill?

  • We want to aim for further efficiency.
  • We want to further reduce the cost of drilling holes.
It may not be enough to review conventional tools or improve the conditions of two-blade drills.
No : 5428
Published : 2024/10/22 00:00 Modified : 2024/12/25 06:24
Category: Tool selection
answer
for removing broken taps 
EX-H-DRL
Common name: Hard Drill
No : 9676
Published : 2021/10/04 11:27 Modified : 2024/08/28 02:29

Searching in progress