PT Screw Taper Angle What is the slope angle on one side?
It is tapered by 1/16 and becomes 3°34'47".
The slope angle on one side is 0.5/16 taper, 1°47'23" per angle.
PT/R/Rc English Pipe Screws
(1)
ねじ全般 | オーエスジー
35 件中 21-30 件を表示
No : 645
公開日時 : 2019/02/26 18:10
更新日時 : 2024/08/28 02:29
カテゴリー：
Screws in general
List of tolerances for metric screws (JIS2 grade)
The conventional JIS standard for metric screws has been erased, so it cannot be confirmed from JIS.
In the table below, you can refer to some of the allowable dimensions and tolerances of the conventional JIS2 class, which are still commonly used today.
No : 277
公開日時 : 2019/02/22 17:32
更新日時 : 2024/08/28 02:29
カテゴリー：
Screws in general
(Current JIS 6H/6g) List of Tolerances of Metric Screws
(ANSI) ASME B1.13M
(DIN) ISO965
No : 278
公開日時 : 2019/02/22 17:32
更新日時 : 2024/08/28 02:29
カテゴリー：
Screws in general
In the size of M1~M68, the yellow part in the attachment below is the normal pitch.
No : 279
公開日時 : 2019/02/22 17:32
更新日時 : 2022/04/27 16:21
カテゴリー：
Screws in general
Combination of screws for pipes < screws>
There are two types of pipe screws: tapered screws for pipes and parallel screws for pipes.
No : 280
公開日時 : 2019/02/22 17:32
更新日時 : 2024/08/28 02:29
カテゴリー：
Screws in general
Thick steel conduit screws
It is a screw specified in JIS as a standard for conduit screws.
JIS C 8305 (Steel conduit)
As a symbol for the thread, it is represented as "CTG".
* Please note that there is also a standard called "CTC" thin steel conduit screw, which is easy to make a mistake.
Taps for PF and PS cannot be used to process CTG threads.
No : 281
公開日時 : 2019/02/22 17:32
更新日時 : 2024/08/28 02:29
カテゴリー：
Screws in general
Thin steel conduit screws
It is a screw specified in JIS as a standard for conduit screws.
JIS C 8305 (Steel conduit)
As a symbol for the thread, it is represented as CTC.
* Please note that there is also a standard called "CTG" thick steel conduit thread, which is easy to make a mistake.
There are no standard stock products for bo
No : 282
公開日時 : 2019/02/22 17:32
更新日時 : 2024/08/28 02:29
カテゴリー：
Screws in general
Implantation bolts: Also known as stud bolts.
This is a standard that specifies the characteristics of steel implantation bolts that are commonly used.
The internal thread that fits into the implantation side is preferably 5H of the metric thread or grade 1.
The external thread on the nut side is 6g (or 2nd gr
No : 283
公開日時 : 2019/02/22 17:32
更新日時 : 2024/08/28 02:29
カテゴリー：
Screws in general
・Automobile tire valves
This is a standard for tire valves used in automobile tires and motorcycle tires specified by JIS.
JIS D 4207
・Bicycle tire valves
This is a standard for tire valves used for rubber tubes defined in JIS K 6304.
JIS D 9422
The taps and gauges of these screws are compatible with special produ
No : 284
公開日時 : 2019/02/22 17:32
更新日時 : 2024/08/28 02:29
カテゴリー：
Screws in general
BSP is a standard for British (BS) pipe (P) threads and is classified into the following three types.
Since the screw shape and dimensions are the same as ISO and conventional JIS pipe screws, tools such as taps and dies in parentheses can be shared.
However, gauges cannot be shared because of different standards, and a dedicated gauge for BSP is required
No : 286
公開日時 : 2019/02/22 17:32
更新日時 : 2024/08/28 02:29
カテゴリー：
Screws in general