使用方法 | オーエスジー

Showing 1-10 of 14 results

answer
The use of screw gauges is determined by JIS standards. Use the gauge of the thread type in the drawing instructions and inspect the screw in a determined manner. Tapered screws for pipes (PT, R, Rc, Rp) used for piping, etc., are screwed into the gauge until the screw stops, and if the pipe end of the screw to be inspected is within the range of the maximum and minimum notches, it is judged that
No : 8455
Published : Modified : 2024/08/28 02:29
Category: Usage
answer
Interpretation of force when using screw<span translate="no"> gauge </span>_"Screw by hand without difficulty"

Interpretation of the amount of force when using screw gauge _screwing by hand without strain

Regarding the use of screw gauge , JIS (JIS B 0251) describ

No : 201
Published : 2024/10/22 00:00 Modified : 2024/11/01 02:38
Category: Usage
answer
I have a PT<span translate="no"> gauge </span>, can I use it as a Rc<span translate="no"> gauge </span>?

I have a PT gauge , can I use it as a Rc gauge ?

Sharing is not allowed.

gauge If you do not use a product that meets the stan

No : 211
Published : 2024/10/22 00:00 Modified : 2024/11/01 02:38
Category: Usage
answer
Precautions for the use of <span translate="no"> gauge </span>

Usage notes for gauge

 1. Do not screw the gauge into the place where the product is moving.
 2. Do not screw with

No : 8743
Published : 2024/10/22 00:00 Modified : 2024/11/01 02:38
Category: Usage
answer
<span translate="no"> gauge </span>Precautions for storage
gauge Precautions for storage

1. Grease with anti-rust oil and store.
Places with little humidity, humidity and temperature change are horrible.

2. Do not store in piles. Scr

No : 8744
Published : 2024/10/22 00:00 Modified : 2024/11/01 02:38
Category: Usage
answer
Your threaded ring gauge (GR) is calibrated with a wear inspection plug gauge (GW) for threaded thread ring gauges.
OSG handles wear inspection screw gauges in standard stock.
In addition, we also accept the service of sending the actual gauge and calibrating it.
No : 9276
Published : 2021/06/08 16:36 Modified : 2022/04/27 16:11
Category: Usage
answer
How to use a spigot gauge (plain gauge)

Plug gauge is a common name for a plug-shaped cylindrical gauge.
Also known as a plain gauge, it is used to check the accuracy of the hole and the inner diameter and pilot diameter of the internal thread.
Both the street and stop sides are passed, which ensures the accuracy of the hole and the inner diamet
No : 8975
Published : 2021/04/27 08:26 Modified : 2024/08/28 02:29
Category: Usage
answer
Wear Inspection Screw Ring Gauge is a gauge that allows you to check whether the plug gauge is worn or not.
 
The diameter of the plug gauge decreases as it wears out over time.
If the diameter becomes too small due to wear, the plug gauge will not be able to make the correct decision.
 
The wear inspect
No : 7714
Published : 2020/06/22 15:57 Modified : 2024/08/28 02:29
Category: Usage
answer
The wear inspection screw plug gauge is a gauge to check whether the limit ring gauge for screws is too worn.
The diameter of the limit ring gauge for screws increases as it is used and worn. If the diameter becomes too large due to wear, the ring gauge will not be able to make a correct pass/fail decision.
The wear i
No : 7712
Published : 2020/06/22 14:40 Modified : 2022/04/14 17:09
Category: Usage
answer

There are three ways to do this:

(1) Measurement by the three-needle method

JIS B0271

(2) Calibration


(3) Judgment by wear inspection ring gauge

The wear inspection screw ring gauge is a ring gauge that checks whether the effective diameter of the limit plug gauge for screws is within the tolerance range including the wear allowanc

No : 7404
Published : 2020/04/10 00:00 Modified : 2022/04/28 00:00
Category: Usage

Searching in progress