What passes for work does not pass for inspection.
As long as the gauge is not worn, it should not be considered.
(FAQID:264)
ねじ・ゲージ | オーエスジー
128 件中 41-50 件を表示
No : 264
公開日時 : 2025/03/07 00:00
更新日時 : 2025/04/17 07:24
カテゴリー：
Screws in general
The Fit Inspection Screw Plug gauge GF is a gauge used for new thread thread ring gauge GR.
For the threaded screw ring gauge GR, it is judged to pass by passing it without difficulty.
(FAQID:265)
No : 265
公開日時 : 2025/03/07 00:00
更新日時 : 2025/04/17 07:24
カテゴリー：
Usage
There are also tolerances in the angle and pitch of the gauge , and there are minute differences on the front and back.
When the effective diameter of the external thread to be judged is close to each other (just about large), the difference may not interfere with it.
It
No : 269
公開日時 : 2025/03/07 00:00
更新日時 : 2025/04/17 07:24
カテゴリー：
Screws in general
It is a precision measuring tool and guarantees the product, so it is not used to remove welding.
In particular, care must be taken when inspecting aluminum because it is easy to weld.
OSG offers a threaded gauge with DLC coating that is effective when inspecting aluminum as standard stock.
<
No : 270
公開日時 : 2025/03/07 00:00
更新日時 : 2025/04/17 07:24
カテゴリー：
Screws in general
If you want to convert the size and pitch of the unified thread standard to millimeters, please refer to the conversion table below.
You can check the number of UNC, UNF, and UNEF piles of unified threads, as well as UN standards.
References: Refer to the Unified Thread System Conversion Table. <
No : 285
公開日時 : 2025/03/07 00:00
更新日時 : 2025/04/17 07:24
カテゴリー：
Screws in general
BSF stands for F in BS (UK).
It corresponds to the fine line of W (thread angle 55°).
Please note that it cannot be shared with a unified thread angle of 60°.
Tap is available for special products.
(FAQID:288)
No : 288
公開日時 : 2025/03/07 00:00
更新日時 : 2025/04/17 07:24
カテゴリー：
Screws in general
Pg screws are conduit screws in the German DIN standard, and the tool is compatible with special products.
▽ Thin steel conduit screws JIS C 8305
CTC Threads and Pg Threads
| Screw symbol | CTC | Pg |
| standard | JIS B 0204 | <
No : 291
公開日時 : 2025/03/07 00:00
更新日時 : 2025/04/17 07:24
カテゴリー：
Screws in general
NC screws are American 60-degree screws. Tap can be shared, but gauge can be used as a special product.
(FAQID:292)
No : 292
公開日時 : 2025/03/07 00:00
更新日時 : 2025/04/17 07:24
カテゴリー：
Screws in general
Since it represents the number of mountains between 1 inch (= 25.4 mm), the pitch conversion (mm) can be calculated by dividing 25.4 by the number of mountains.
▽ Unified Screw Representation
Since the unit of measurement is inches, it needs to be converted to millimeters.
Calculated as 1 inch = 25.4 mm.
For 3/8-16 UNC,
・Outer diameter = 3/8
25.4×3/8＝9.525mm
Pitc
No : 294
公開日時 : 2025/03/07 00:00
更新日時 : 2025/04/17 07:24
カテゴリー：
Screws in general
W (wit) has a thread angle of 55°, and U (unify) has a thread angle of 60°, so it is not recommended to fit them together.
(FAQID:298)
No : 298
公開日時 : 2025/03/07 00:00
更新日時 : 2025/04/17 07:24
カテゴリー：
Screws in general