被削材別加工 | オーエスジー

Showing 1-10 of 12 results

answer
Tools for processing ceramics

If the state of the ceramics is semi-sintered, try using a diamond-coated tool.

For sintered ceramics, choose the electrodeposited diamond tool CeraDrill CeraDrill Tap for grinding centers.

No : 681
Published : Modified : 2024/08/28 02:29
Category: Other
answer

There is a stainless steel equivalent table in JIS (Japan industrial standard), ISO15510 (international standard), EN (European standard), UNS and AISI (American standard), and GB (Chinese standard).

Please check the steel type number from the link below and refer to the cutting condition table for that item.

Please refer to the cutting data table of the ADO-SUS series, EX-SUS se

No : 342
Published : 2025/03/07 00:00 Modified : 2025/04/17 07:24
Category: Stainless steel
answer

No : 344
Published : 2025/03/07 00:00 Modified : 2025/04/17 07:24
Category: Stainless steel
answer

Due to chip control and work hardening issues, high-speed tapping is not recommended.

(FAQID:345)

No : 345
Published : 2025/03/07 00:00 Modified : 2025/04/17 07:24
Category: Stainless steel
answer

For ordinary SUS Tap , both spiral fluted tap and spiral pointed tap are for depths up to 1.5~2 times the thread diameter.

If it is longer than that, we recommend the specification for deep holes.

Reference:

No : 346
Published : 2025/03/07 00:00 Modified : 2025/04/17 07:24
Category: Stainless steel
answer

For stainless steel, where chips tend to stretch and cutting heat tends to accumulate, managing the maximum diameter at actual size within the standard will prevent durability UP problems. Although there are varying degrees, stainless steel tends to shrink when Pilot hole is drilled with a carbide drill. In high-speed drills for stainless steel, which have a sharp

No : 347
Published : 2025/03/07 00:00 Modified : 2025/04/17 07:24
Category: Stainless steel
answer

Austenitic such as SUS304, ferritic such as SUS405 having strong magnetism, martensitic such as SUS420 that can be heat-treated used in medical instruments such as scalpels, precipitation hardening systems such as SUS630 which has excellent strength and is used as heat-resistant steel, Furthermore, in recent years, there are five main types of stainless steel, including duplex stainless steel

No : 349
Published : 2025/03/07 00:00 Modified : 2025/04/17 07:24
Category: Stainless steel
answer
Mechanism of work hardening
For example, a brand new futon is fluffy.
However, if you use it for a long time, the cotton will be compressed and become hard.
Imagine that a similar phenomenon occurs in the structure of metals.

The metallographic structure is also initially arranged with atoms in an orderly manner.
If the alignment is bent or rubbed, it will crumble and be
No : 1118
Published : 2019/03/15 16:49 Modified : 2019/03/15 16:55
Category: Stainless steel
answer

There are two types of titanium: pure titanium (e.g., two types of titanium) and titanium alloys (e.g., Ti-6Al-4V). First of all, in the case of pure titanium, we recommend stainless steel taps or A-taps with good sharpness because the hardness of the workpiece material is not high. In the case of titanium alloys, many of them have a hardness of more than 30 HRC, so we recommend the CPM tap ser

No : 373
Published : 2019/02/25 16:55 Modified : 2022/08/25 17:51
Category: Heat-resistant alloys
answer

I would like to introduce a typical one.

 

SUS304

Austenitic stainless steel. It is a material that is prone to work hardening and welding.

The cutting force is also large, and the life of the tool tends to be shortened.

It is also a grade with a lot of variation in properties dep

No : 341
Published : 2019/02/25 16:48 Modified : 2024/08/28 02:29
Category: Stainless steel

Searching in progress