SKS is an alloy tool steel, commonly known as tungsten.
On the packaging box, it is labeled "HIGH QUALITY TAPS".
| Tool NoProduct | Name | Meal SizeTool | No | Product Name | Food | Size | ||
|---|---|---|---|---|---|---|---|---|
| 25011 |
タップ | オーエスジー
88 件中 41-50 件を表示
No : 8050
公開日時 : 2020/10/01 16:55
更新日時 : 2024/08/28 02:29
カテゴリー：
General
Instructions for using tapered taps for pipes
(1) Drill a pilot hole with the diameter set for each call.
No : 8031
公開日時 : 2020/09/29 18:17
更新日時 : 2024/08/28 02:29
A interrupted -type tap is a tap with a specification in which the thread of the complete tap thread is skipped by one pile.
| A tap in which the threads of the complete peak of the tap have been removed in one pile. |
No : 8017
公開日時 : 2020/09/29 10:05
更新日時 : 2024/08/28 02:29
カテゴリー：
General
What is a precision notation STD?
Accuracy notation STD is the accuracy of the tap recommended when machining thread accuracy grade 2 or 6H female thread equivalent. The accuracy notation STD indicates how much tolerance the effective diameter of the tap is controlled. It is an abbreviation for Standard. STD+1, STD+2, etc. are called oversizes.
No : 8015
公開日時 : 2020/09/29 00:00
更新日時 : 2024/11/01 02:39
カテゴリー：
General
Homo treatment (steam treatment)
Creates aFe3O4(black rust) film on the surface of the tool
| < characteristics> |
|---|
| Blue-black color |
No : 7991
公開日時 : 2020/09/28 07:43
更新日時 : 2024/08/28 02:29
カテゴリー：
General
The cone-shaped part of the tap tip is called " external center ".
This part is attached during the manufacture of taps and is not used during threading.
The presence or absence of external center is determined by the type of tap and the range of size .
straig
No : 7943
公開日時 : 2020/09/24 09:28
更新日時 : 2024/08/28 02:29
カテゴリー：
General
The shank diameter of the tap is conventionally determined by JIS, etc., but it is generally used in end mills when used in machines with a full lead feed function.
By using diameters such as 4 mm, 6 mm, and 8 mm, it is a shank shape that can enable a strong and precise grasp.
No : 7936
公開日時 : 2020/09/24 08:12
更新日時 : 2021/04/26 13:51
カテゴリー：
General
The rotational resistance in tapping is called the cutting torque of the tap.
Factors affecting torque are related to the shape of the tap, such as the type of tap, the size of the angle, and the length of the bite.
There are cutting conditions such as the type of workpiece material, threading length, and pilot hole diameter.
These are int
No : 7798
公開日時 : 2020/08/24 10:18
更新日時 : 2020/08/24 10:18
カテゴリー：
Other
forming tap is a tap that processes threads by plastically deforming the minor diameter of the pilot holes. Since the threads are machined without cutting, there are no chips.
forming tap , New Roll Tap, Fluteless Tap, Raised Tap, and Forming Tap also refer to forming tap <
No : 7036
公開日時 : 2020/03/18 16:58
更新日時 : 2023/05/09 11:46
カテゴリー：
General
The following points should be paid special attention to when tapping.
(1) Tap selection
Check whether you are using a tap that is suitable for the type and hardness of the material from the list of suitable materials in the catalog. Depending on the through hole or bli
No : 5511
公開日時 : 2020/01/29 14:33
更新日時 : 2024/08/28 02:29