What are the tools for breakage Tap removal?
Breakage Tap Refers to the drill "EX-H-DRL" for removal. This drill breaks the core of the broken Tap and removes the Tap . Use a drill diameter that is adapted to the shape and size. This drill is used
タップ | オーエスジー
Showing 1-10 of 88 results
No : 704
Published :
Modified : 2024/08/28 02:29
Please check the following as a countermeasure in the event of galling or gnawing of the internal thread during tapping.
- Check if the tap is right on the workpiece material.
・ Check whether the part with the bite is worn
・Increase the lubricity of the cut oil (if i
No : 8218
Published :
Modified : 2024/08/28 02:29
Category：
Tool selection
Steps to use point-to-tap
(1) Drill a pilot hole with the size of minor diameter of the tap
(2) Select the cutting data of spiral pointed tap
The rotation speed (min-1) (=S) is calculated from the above tap tool diameter and the cutting speed within
No : 8238
Published :
Modified : 2024/08/28 02:29
The pilot hole is machined with a drill that takes into account the expansion allowance from the standard dimensions of the pilot hole diameter.
In the case of a cutting tap, the pilot hole = minor diameter , so check the pilot hole with a minor diameter plug gauge.
The reason why the pilot hole is minor
In the case of a cutting tap, the pilot hole = minor diameter , so check the pilot hole with a minor diameter plug gauge.
The reason why the pilot hole is minor
No : 8323
Published :
Modified : 2024/08/28 02:29
How is the machining depth of Tap calculated?
To calculate the machining depth of the Tap , check the following lengths from the drawing instructions or from the catalogue from Tap .
No : 9535
Published :
Modified : 2024/08/28 02:29
In conversations with customers, we sometimes express that we want a tap of the sambu.
Sambu is one of the so-called industry terms, and the size of the screw expressed in inches may be expressed as "○○ bu".
1/8 = Ichibu (1 minute)
1/4 = 2/8 = nib (2 minutes)
3/8 = Sambu (3 minutes)
1/2 = 4/8 = Yongbu Shibu (4 minutes)
It is called by adding "bu" to the
No : 2528
Published : 2025/09/15 00:00
Modified : 2025/09/18 03:27
Category：
General
Only the line where size is in inch is in the standard lineup.
General use (HT, SFT, POT)
General Purpose Long Shank (HT, SFT, POT)
For SUS (SFT, POT)
NT (Nut Tap)
The size W20-12 and W20-16 (No. 2) and pitch are not included in the standard product, so they
No : 8144
Published : 2025/09/15 00:00
Modified : 2025/09/18 03:27
Category：
Tool selection
The OSG Group not only manufactures tools, but also regrinding and recoatings.
While making the most of the know-how of tool manufacturers, we contribute to improving our customers' productivity and reducing costs through strict quality control.
We can handle drills, Tap , end mills, forging, diamond tools, and re
No : 13381
Published : 2025/03/07 00:00
Modified : 2025/04/17 07:24
Category：
Other
Tap processing of titanium 2 types (TB340)
Two types of titanium (TB340) are pure titanium without heat treatment, and we recommend the Tap "EX-SUS-SFT" for stainless steel.
"V-TI-S
No : 520
Published : 2024/10/22 00:00
Modified : 2024/11/01 02:38
Category：
Tool selection
Tap processing for Hastelloy C22 and C276
For Tap processing of Hastelloy C22 and C276, A-SFT and EX-SUS-SFT are recommended if they have been settled. As a guideline for cutting condi
No : 525
Published : 2024/10/22 00:00
Modified : 2024/11/01 02:38
Category：
Tool selection