ツールプリセッタとは？ | オーエスジー

Cutting tools are rotated at very high speeds. A preset meaning to set in advance. Presetting and measuring cutting tools before machining can help reduce defects, prevent collisions, and reduce costs.

 

 

(1) It is a tool that performs information such as tool length and tool diameter required for machining by external setup.

(2) By setting up externally, it is possible to increase the operating rate of the machine and improve productivity.

(3) By checking and adjusting the runout when the tool is installed, it is possible to take advantage of the potential of the tool and process stably with high efficiency.

Comparison when measuring tools

For Dial Tap

・Since it is a contact type, there is a risk of blade chipping .
・ Positioning and reading may differ depending on the person.
・It takes a long time to measure. ・Data is managed by hand

For Tool Presetter OZT

・ Since it is a camera type (non-contact), there is no fear of blade chipping
・Automatic cutting edge recognition system that makes it difficult for people to make differences between people
・Measurement time is only a few tens of seconds ・Various management such as data storage and transfer is possible.

 

 

 

 

 

What do you mean by "anyone", "easily", and "with high accuracy"?

The strength of the OZT series is both easy and quick operation and high precision.

 

The calibration system on the calibration edge of the OZT adapter makes it easy for anyone to do without the need for a master bar.

 

BT, HSK, and other adapters equipped with calibration edges are available.

It frees you from the calibration work with the master bar, which is required for each measurement of different adapters. You don't even need to manage the master bar.