戻る
exchangeable head High-performance DLC end mill for non-ferrous applications PXAL
Is there a large-diameter end mill that can process non-ferrous metals such as aluminum with higher precision, higher efficiency, and higher durability?
If possible, if you want to keep the price down and use it for small machining, PXAL is recommended.
It is a high-performance type with specifications that meet the needs of high-precision processing of non-ferrous metals.
The fact that it is a three-blade DLC coating is a starting point, and in addition to that, it is a tool with specifications that fulfill further requests.
Big heartiness
Compared to conventional products, it has a larger thickness and rigidity, but the special groove shape does not impair chip discharge.
The more high-efficiency machining is required, the more rigidity and chip discharge are required to prevent vibration.
Compared to conventional products, it has a larger thickness and rigidity, but the special groove shape does not impair chip discharge.
The more high-efficiency machining is required, the more rigidity and chip discharge are required to prevent vibration.
High-performance specifications for a wide variety of processing forms
・Three-blade end cutting edge connecting the center
By connecting the end cutting edge at the center of the tool, it is possible to perform thrust processing with a well-balanced load distribution even with three blades.
In addition, the groove specification with excellent discharge performance is compatible with various passes such as ramping and contouring!
・Three-blade end cutting edge connecting the center
By connecting the end cutting edge at the center of the tool, it is possible to perform thrust processing with a well-balanced load distribution even with three blades.
In addition, the groove specification with excellent discharge performance is compatible with various passes such as ramping and contouring!
Specifications aimed at higher precision workpiece quality
・ end cutting edge Blade specification
Normally, the end mill has a step due to feed due to the watermark angle.
By attaching a smooth blade, the step difference can be suppressed, and a more accurate bottom surface quality can be achieved!
・ end cutting edge Blade specification
Normally, the end mill has a step due to feed due to the watermark angle.
By attaching a smooth blade, the step difference can be suppressed, and a more accurate bottom surface quality can be achieved!
DLC coating for even longer life
・DLC-IGUSS coating
coating thickness Thick DLC coating allows even aluminum die casting with a high content of Si (silicon), which is easy to wear the tool,
Welding resistance, wear resistance can be obtained, stable and long service life!
As of August 2020, OSG is the only DLC coat item in the non-ferrous exchangeable head !
・DLC-IGUSS coating
coating thickness Thick DLC coating allows even aluminum die casting with a high content of Si (silicon), which is easy to wear the tool,
Welding resistance, wear resistance can be obtained, stable and long service life!
As of August 2020, OSG is the only DLC coat item in the non-ferrous exchangeable head !
Benefit from stiffness due to protruding length
In combination with a dedicated collet, an overwhelming amount of chip discharge is possible even with a small machining center.
・PXM collet PXMC (extra short type)
The combination with a special collet that can shorten the amount of tool protrusion is advantageous in terms of rigidity and dramatically improves machining efficiency.
・PXM collet PXMC (extra short type)
The combination with a special collet that can shorten the amount of tool protrusion is advantageous in terms of rigidity and dramatically improves machining efficiency.
If you are looking for a high-precision processing surface for non-ferrous metals, such as semiconductor manufacturing equipment,
This series is recommended for users who are worried about both high efficiency and vibration suppression!
This series is recommended for users who are worried about both high efficiency and vibration suppression!
If you need high-precision machining with a tool diameter of φ3~φ12, please consider AE-VTS-N.
Also, if you want to process non-ferrous metals with a tool diameter of φ3~φ12, which is also more cost-effective,
We recommend the AE-TS-N and AE-TL-N series, which have a high performance level as standard.
We recommend the AE-TS-N and AE-TL-N series, which have a high performance level as standard.
(FAQID:7838)