adf-2d平面加工時の送り量の目安

Approximate feed amount during ADF-2D plane machining

As a guideline for general materials, set the drill diameter ×2% (drill diameter × 0.02) at the feed amount per revolution (mm/rev).

* When exceeding 35HRC, exceeding φ12, lathes, automatic panels, machine rigidity, and workpiece retention are poor.

Set × drill diameter × 1.5% (drill diameter 0.015) as a guide for the amount of feed per revolution (mm/rev).

adf-2d平面加工時の送り量の目安 | オーエスジー