エコカットミニの特長は？＜エコカット＞ | オーエスジー

What are the features of the Eco Cut Mini? < Eco Cut>

With conventional tools such as boring bars, the smaller the diameter, the lower the tool rigidity, making it difficult to perform high-efficiency machining. This is possible thanks to the small diameter of the EcoCut Mini, high tool rigidity and high chip discharge.

Advantages of the Eco Cut Mini

Tool consolidation, machining time reduction, tool cost reduction

(1) Drilling, internal turning, external turning, and end face turning are possible with a single chip.
Like EcoCut, it can perform internal turning with a thicker tool diameter than conventional inner diameter machining tools, enabling high-efficiency machining.

(2) Hole diameter flat machining is easy in a short time
In the case of a small diameter deep hole, the tool used is also a small diameter, making stable machining more difficult.
In particular, it takes a lot of process and time to flatten the bottom of the hole with the conventional method.

Conventional processing

1. Pilot hole processing
(Drill)

2. Corner cutting (machining inner diameter bar)

Leftover shavings occur in the center of the bottom

2. counterboring Machining (Flat Drilling)

EcoCut Mini
Flat hole processing Unlike normal drilling, the bottom of the hole at the time of drilling is flat.