返回
Causes and countermeasures for bending in band saws
Troubleshooting bends in band saws
| ① | Under-shear blade tension | Check and adjust the tension (18~24kg/square centimeter) |
| ② | High wear on the side rollers | Replace the side rollers |
| ③ | Excessive spacing of guides | Move the idling arm as close to the workpiece as possible. |
| ④ | Excessive descent speed | Adjust the feed scale to achieve an appropriate descent speed. |
| ⑤ | On and off the side of the saw blade | Check the side roller insert chip and replace it according to the wear condition. |
| ⑥ | Loose workpiece clamp | Check the fastening of the workpiece. Especially in the case of bundling, fix it sufficiently |
| ⑦ | Band Saw Clam Defective | Band Saw Clam Review |
(FAQID:131)