戻る
What do I need to get started with Synchro Master?
In order to use Synchro Master, you will need the following:
| SynchroMaster (Holder + Cap) | Colette (sold separately) | Spanner (sold separately) | ||
|---|---|---|---|---|
 |
+ |  |
+ |  |
| Synchro Master Holder (Catalog) | Synchro Master Collet (Catalog) |
* Cap attached to the holder. Pull stud bolts are not included.
* Collet and spanner must be ordered separately.
* Please use it with a machine with a synchronous feed mechanism.
・Spanner
| Spanner | Tool No. | size | Applicable Holder Size |
|---|---|---|---|
 |
76910 | S-8E | SMH8 |
 |
79923 | FKT-32L | SMH16 |
| 79993 | FKT-50L | SMH32 |
・Torque wrenches (available on order) are also available. For details, please contact our sales team.
When using coolant through (internal lubrication)
The BT shank and WBT-AHO shank holders require pull-stud bolts (pull bolts) that are coolant-through-compatible.
If you are using a WBT (Two-Sided Restraint BT) shank holder, you will also need a coolant pipe. If you do not have one, please purchase it separately.
The HSK shank holder is supplied with a coolant hose.
Please select the collet from the table below together with the Tap to be used.
| Machinery | Tap Oil Hole | Collet |
|---|---|---|
| Internal lubrication (center-through) | existence | GH type* |
| Internal lubrication (collet through) | without | GHC Type |
| external coolant supply }} | without | GH type |
* ER8GH does not support center thru
(FAQID:12648)